Solving a Conjugate Heat Transfer Problem using Ansys Fluent The contemporary conjugate heat transfer model was developed after computers came into wide use in order to substitute the empirical relation of proportionality of heat flux to temperature difference with heat…
Simulation of Solidification Solidification, also known as freezing, is a phase change of matter that results in the production of a solid. Generally, this occurs when the temperature of a liquid is lowered below its freezing point. Although the freezing…
Simulation of flow and thermal modeling of a headlamp In the theory of radiative transfer, of either thermal or neutron radiation, a position and direction-dependent intensity function is usually sought for the description of the radiation field. The intensity field can in…
Modeling Radiation and Natural Convection Many techniques have been introduced in the past years to improve the efficiency of heat exchange systems involving natural convection and/or forced convection, and with or without phase change. In this area of research, researchers…
Modeling Periodic Flow and Heat Transfer Many industrial applications, such as steam generation in a boiler or air cooling in the coil of an air conditioner, can be modeled as two-dimensional periodic heat flow. This tutorial demonstrates how to set…
Coriolis flow meter in Ansys Fluent In this tutorial, we provide guidelines for modeling and simulation of Coriolis flow meter in Ansys Fluent software. Fluid flow causes a phase shift between the inlet and outlet arms of the meter which…
Modeling bubbling fluidized bed using DDPM+DEM The DEM collision pattern develops the DPM pattern in Fluent to model dense particulate flows.The pattern can be used with Dense DPM to account for the effect of blockage of particles on early phase…
Simulation and analysis of fluid flow on Butterfly Valve In this tutorial, we demonstrate how to perform a coupled fluid-structure analysis of butterfly valve in a pipe using Ansys AIM. The simulation represents the ease of setting up and solving…
Generating and Improving Cutcell Mesh for a manifold In this tutorial, we provide guidelines for CutCell Mesh Generation for a manifold in ANSYS Fluent (meshing mode). We can use CutCell mesh for a variety of applications. CutCell mesh can produce…
Using Conformal Faceting to Generate a Volume Mesh In this tutorial, we provide guidelines for CAD Import and Meshing from conformal faceting input. Here we demonstrate that how to use conformal faceting as a surface mesh to generate a volume…
