CFD Simulation of Flow in a hydrocyclone Using ANSYS Fluent Software
This separator is based on the vortex force produced by its helical body, which, unlike the simple appearance of the machine, does not have an engine, blade, and movable and electric parts. This device has an exciting and sophisticated performance. One of the interesting issues in this device is that there is at least one movable blade in the usual separators, which are rotated by electromotor force, and produce airflow and separates the small from coarse grains. But in hydrocyclones, a circular airflow is generated by its body, which the body is made up of a helix and is curved that acts as a tornado accelerator and accelerates the flow in the curvature of the body and finds the flow of air that generates a whirlwind.
The hydrocyclones perform the separation based on the centrifugal force. So that the flow of gas (fluid) passing the dust from the upper wall of the hydrocyclone body, which is cylindrical and leads to a defective cone, enters the cyclone and flows downward. At first swirl in the circular space of the exhaust pipe and the inner surface of the cylindrical part of the hydrocyclone, and then in the hydrocyclone chamber, thus creating an environmental vortex. This operation increases the centrifugal forces and drives dust particles along the gas towards the cylinder wall and cone sections. In the cone section, the flow of gas changes direction and goes upwards and outlet pipe. The dust particles after contact with the cyclone wall fall to the bottom of the cyclone and exit through the hydrocyclone outlet.
In this analysis, it has been tried to simulate and analyze the air separator flow in a hydrocyclone using ANSYS Fluent software.
Mr CFD Company Services
Due to the wide range of mechanical science and the different fields of work as well as the abundance of projects, our company accepts any CFD consulting. This company offers to view all the products presented in this section. In the absence of any desired project or project close to your request, you can search the www.cfd-shop.com marketplace in order to find your eligible project, after all, if you didn’t find any ideal project you can order your project from the services pages on the header of this website. Your order will be reviewed by our experts in the shortest possible time, and if we need more information about the proposed project, we will be in touch with you. After completing the required information to examine the proposed project, and confirming your request, the time, conditions and costs will be sent to you during the contract. This process will take place as soon as possible. If you have any question or problem about CFD consulting, you can contact our online support section (the fixed blue tab below the page). If it is offline, don’t worry, you can post your message, and it will be answered as soon as possible.
The product which is analyzed on this page was made according to our customer’s request. The cost of this product at the first place was 1285$. This product has now been redeemed, and its cost is 435$, you can purchase it right now by clicking on “Buy Now” button in order to save your money and time.
TITLE: CFD Simulation of Flow in a hydrocyclone Using ANSYS Fluent Software
PROJECT TYPE: Mechanical, Discrete Phase Model
TIME: 39 days
PRIMARY PRICE: 1285$
PRICE IN STORE: 435$