skip to Main Content

usa+1 (903) 231-3943 ge+995 (593) 675-107

Project Description

CFD Simulation of the combustion chamber in the gas turbine engine by the ANSYS Fluent software

Over the past twenty years, there has been a significant increase in the use of gas turbines in various industries, power plants, planes and rockets. The efficiency of turbines directly affects fuel consumption and dramatically reduces cost efficiency. The gas turbine consists of several parts, including air inlet, compressor for increasing air pressure, combustion chamber in which combustion of fuel and air takes place, turbine for extraction of energy, and finally, gas outlet. To increase the efficiency of gas turbines, we need to examine each component and parts. Combustion in the chamber is one of the most important parts in the gas turbine. The flow inside the combustion chamber also involves chemical reactions. Therefore, the design of the combustion chamber is very important. The computational fluid dynamics analysis of the combustion chamber is absolutely essential and helps to better understand the combustion and flow patterns. The results of simulations will reduce the cost of construction, and by increasing performance, we can contribute to a healthier environment.

The simulation of combustion and combustion chamber in a gas turbine engine was carried out in this project. This combustion chamber is related to the Siemens V94.2 gas turbine with a nominal capacity of 159 megawatts and the efficiency of 34.9%, one of which is a heavy-duty gas turbine, which is widely used in gas plants and the combined cycle to move power generators. The turbine is manufactured by the engineering, and licensed by Siemens. The fuel used is liquid fuels, gasoline, heavy fuel oil, and gas fuels with a variety of thermal values, in particular natural gas.

In this analysis, it has been attempted to simulate and analyze the combustion in the combustion chamber of the Siemens V94.2 gas turbine, licensed by Siemens Germany, using ANSYS Fluent software.

Mr CFD Company Services

Due to the wide range of mechanical science and the different fields of work as well as the abundance of projects, our company accepts any CFD consulting. This company offers to view all the products presented in this section. In the absence of any desired project or project close to your request, you can search the marketplace in order to find your eligible project, after all, if you didn’t find any ideal project you can order your project from the services pages on the header of this website. Your order will be reviewed by our experts in the shortest possible time, and if we need more information about the proposed project, we will be in touch with you. After completing the required information to examine the proposed project, and confirming your request, the time, conditions and costs will be sent to you during the contract. This process will take place as soon as possible. If you have any question or problem about CFD consulting, you can contact our online support section (the fixed blue tab below the page). If it is offline, don’t worry, you can post your message, and it will be answered as soon as possible.

The product which is analyzed on this page was made according to our customer’s request. The cost of this product at the first place was 685$. This product has now been redeemed, and its cost is 245$, you can purchase it right now by clicking on “Buy Now” button in order to save your money and time.

Project Details

TITLE: CFD Simulation of the combustion chamber in the gas turbine engine by the ANSYS Fluent software

PROJECT TYPE: Mechanical, Heat Transfer, Combustion

TIME: 46 days



Back To Top
×Close search
Call On WhatsApp