Particle Flow

Mr-CFD offers a complete range of CFD analysis, consulting services and training in particle flow

Particle flowcyclone

Particle flow is a kind of two-phase flow in which one phase is present continuously, usually named carrier phase. And the other phase (particle phase) consists of small immiscible particles in the fluid flow.

There are three approaches for modeling of particle-primary fluid interaction

  • One way –this model just calculates the effect of primary fluid flow on particle path
  • Two way –particle fluid flow and carrier fluid flow interact with each other simultaneously
  • Four-way. Is like two way but also there is particle-particle interaction

We are expertise in the field of discrete phase model, and we’ve done various project in this filed. DPM simulation has a different application like fuel spray, particle combustion, cyclone, scrubber, etc.

We use ANSYS Fluent software package for modeling discrete phase model. You can see some of our project that we use DPM modelcyclone

  • CFD simulation particle separator from gas using cyclone
  • Using particle droplet combustion in two and four-stroke internal combustion engine
  • Simulation particle settling by the gravity body force
  • Wood combustion using the discrete phase model
  • Sand particle tracking in the pond riverside
  • Particle tracking in spray dryer using the DPM model
  • Simulation of using magnetohydrodynamic (MHD) body force for increasing performance of cyclon
  • errosion modeling in knee

Particle flow occurs in many engineering problems. For instance, some of its application areas in the industry are as follows. Fluidized beds, carbon capture, electrostatic reciprocator, solid separator cyclones, etc.. When investigating particle flow, we should take into account different phenomena. For example, the particles influence the overall properties of the fluid flow. They can change the heat transfer rate.erossion

Moreover, different forces can affect particles. Forces such as electrical, electromagnetic and the forces between particles themselves. Designers of mechanical systems have an interest in predicting the trajectory of particles in the fluid flow. This is also very prominent when in the fluid flow charged particles and electromagnetic fields are present simultaneously.

ANSYS Fluent is a powerful CFD tool for the simulation of particle flows, and MR CFD Company is ready to organize your projects in this field.

Mr CFD Company services

Due to the wide range of mechanical science and the different fields of work as well as the abundance of projects, this company offers to view all the products presented in this section. In the absence of any desired project or project close to your request, you can search our portfolios in order to find your eligible project, after all, if you didn’t find any ideal project you can order your project from the services pages on the header of this website. Your order will be reviewed by our experts in the shortest possible time, and if we need more information about the proposed project, we will be in touch with you. After completing the required information to examine the proposed project, and confirming your request, the time, conditions and costs will be sent to you during the contract. This process will take place as soon as possible. If you have any question, you can contact to our online support section (the fixed blue tab below the page). If it is offline, don’t worry, you can post your message, and it will be answered as soon as possible.partcile combsustion

Portfolios

These are our latest successful projects.

Cavitation Simulation In Francis Turbine By ANSYS Fluent
Cavitation Simulation in Francis Turbine by ANSYS Fluent
Free Surface Flows (Multiphase), Mechanical, Renewable, Turbomachinery

Cavitation Simulation in Francis Turbine by ANSYS Fluent

Cavitation simulation in Francis turbine by ANSYS Fluent One of the most prevalent applications of fluid mechanics is Turbomachinery designing.…

Combustion Chamber In The Gas Turbine Engine By ANSYS Fluent
Combustion chamber in the gas turbine engine by ANSYS Fluent
Combustion, Heat Transfer, Mechanical, Reacting Flows and Combustion, Single-Phase, Non-Reacting Flows

Combustion chamber in the gas turbine engine by ANSYS Fluent

CFD Simulation of the combustion chamber in the gas turbine engine by the ANSYS Fluent software Over the past twenty…

Air Conditioning CFD Simulation Of The Surgery Room
Air conditioning CFD simulation of the surgery room
Heat Transfer, Mechanical, Single-Phase, Non-Reacting Flows

Air conditioning CFD simulation of the surgery room

Air conditioning CFD simulation of the surgery room using the ANSYS Fluent software One of the most important hazards in…

3-blade Horizontal Axis Wind Turbine (HAWT)-CFD Simulation
3-blade horizontal axis wind turbine (HAWT)-CFD simulation
Aerospace, Mechanical, Single-Phase, Non-Reacting Flows

3-blade horizontal axis wind turbine (HAWT)-CFD simulation

3-blade horizontal axis wind turbine (HAWT) CFD simulation by ANSYS Fluent software Wind turbines generally convert wind energy into electrical…

Real Porous Media CFD Simulation By ANSYS Fluent Software
Real porous media CFD simulation by ANSYS Fluent software
Heat Transfer, Mechanical, Single-Phase, Non-Reacting Flows

Real porous media CFD simulation by ANSYS Fluent software

Real porous media CFD simulation by ANSYS Fluent software Study of fluid flow in porous media is one of the…

CFD Simulation Of A Real Unmanned Aerial Vehicle (UAV-Aircraft)
CFD simulation of a real Unmanned Aerial Vehicle (UAV-Aircraft)
Aerospace, Mechanical, Single-Phase, Non-Reacting Flows

CFD simulation of a real Unmanned Aerial Vehicle (UAV-Aircraft)

CFD simulation of a real Unmanned Aerial Vehicle (UAV-Aircraft) using ANSYS Fluent software Drones can be considered as small non-pilot…

Our Process

If you want to know what we will do with your project read our steps blow.

STEP 1

Please send the details of your project through the link below.

STEP 2

Our colleagues will call you as soon as possible; then after advising you on your project, we will specify the steps of the project in detail, the fee and the delivery time for each step.

STEP 3

After paying the deposit, we will start your project and the results of each step will be sent to you in the specified deadlines. Once you have investigated your results and confirmed it, the fee of that step should be paid.

STEP 4

All of the results and files related to simulations will be sent to you and you will receive the required training.

What are you waiting for? Submit your project consulting for free!

Free Consulting!

Yes, it is right that we can do everything you want the only thing that you should do is to fill the form at the Free Consulting Page and send us your project’s details then our support team will be in touch with you as soon as possible and they will give you free consulting for your project.

Free Consulting
Call On WhatsApp
Search