Moving mesh or Sliding mesh

Mr-CFD offers a complete range of CFD analysis, consulting services and training in Moving mesh

 moving mesh or sliding meshsavonius

Study of fluid flow around moving body and devices is an interesting subject. These areas consist study of various type of wind turbines (VAWT and HAWT), turbomachinery (pump, compressor, turbine, fan, and blowers), etc. by ANSYS Fluent software we are able to simulate behavior of fluid flow around and inside this device and find and improve performance of these devices. There is various module in ANSYS fluent to model and simulate the moving objects (moving reference frame, moving mesh, dynamic mesh, moving wall) and each module has itself limitation, advantage, and disadvantage and in most problem one special module able to simulate that work. for example we can model HAWT by both MRF and moving mesh. And we know that result of both modules is same and because we should use transient mode for moving mesh case, computational time will be higher than MRF and we prefer to model HAWT by MRF method. But in VAWT it is not possible to model it with MRF model because the wind turbine blade situation VS wind direction will change during time and we must simulate is with moving mesh.moving mesh

We are expert in the field of CFD simulation of various device by moving mesh and in the other word sliding mesh. We do this simulation by ANSYS Fluent software. In the following, you can see a summary our accomplished project related to this module.

  • Various type of horizontal and vertical axis wind turbine
  • Various type and situation of Tidal turbines ( two and three and four-bladed)
  • Simulation of turbomachinery include (pumps, compressors, etc.)
  • Airplane propeller CFD simulationproppeler
  • Simulation turbofan and AFT fan
  • Simulation of cavitation in Francis, Kaplan and Pelton turbine
  • Simulation of the rescue helicopter

 

Mr CFD Company services

Due to the wide range of mechanical science and the different fields of work as well as the abundance of projects, this company offers to view all the products presented in this section. In the absence of any desired project or project close to your request, you can search our portfolios in order to find your eligible project, vawtafter all, if you didn’t find any ideal project you can order your project from the services pages on the header of this website. Your order will be reviewed by our experts in the shortest possible time, and if we need more information about the proposed project, we will be in touch with you. After completing the required information to examine the proposed project, and confirming your request, the time, conditions and costs will be sent to you during the contract. This process will take place as soon as possible. If you have any question, you can contact to our online support section (the fixed blue tab below the page). If it is offline, don’t worry, you can post your message, and it will be answered as soon as possible.

Portfolios

These are our latest successful projects.

Cavitation Simulation In Francis Turbine By ANSYS Fluent
Cavitation Simulation in Francis Turbine by ANSYS Fluent
Free Surface Flows (Multiphase), Mechanical, Renewable, Turbomachinery

Cavitation Simulation in Francis Turbine by ANSYS Fluent

Cavitation simulation in Francis turbine by ANSYS Fluent One of the most prevalent applications of fluid mechanics is Turbomachinery designing.…

Combustion Chamber In The Gas Turbine Engine By ANSYS Fluent
Combustion chamber in the gas turbine engine by ANSYS Fluent
Combustion, Heat Transfer, Mechanical, Reacting Flows and Combustion, Single-Phase, Non-Reacting Flows

Combustion chamber in the gas turbine engine by ANSYS Fluent

CFD Simulation of the combustion chamber in the gas turbine engine by the ANSYS Fluent software Over the past twenty…

Air Conditioning CFD Simulation Of The Surgery Room
Air conditioning CFD simulation of the surgery room
Heat Transfer, Mechanical, Single-Phase, Non-Reacting Flows

Air conditioning CFD simulation of the surgery room

Air conditioning CFD simulation of the surgery room using the ANSYS Fluent software One of the most important hazards in…

3-blade Horizontal Axis Wind Turbine (HAWT)-CFD Simulation
3-blade horizontal axis wind turbine (HAWT)-CFD simulation
Aerospace, Mechanical, Single-Phase, Non-Reacting Flows

3-blade horizontal axis wind turbine (HAWT)-CFD simulation

3-blade horizontal axis wind turbine (HAWT) CFD simulation by ANSYS Fluent software Wind turbines generally convert wind energy into electrical…

Real Porous Media CFD Simulation By ANSYS Fluent Software
Real porous media CFD simulation by ANSYS Fluent software
Heat Transfer, Mechanical, Single-Phase, Non-Reacting Flows

Real porous media CFD simulation by ANSYS Fluent software

Real porous media CFD simulation by ANSYS Fluent software Study of fluid flow in porous media is one of the…

CFD Simulation Of A Real Unmanned Aerial Vehicle (UAV-Aircraft)
CFD simulation of a real Unmanned Aerial Vehicle (UAV-Aircraft)
Aerospace, Mechanical, Single-Phase, Non-Reacting Flows

CFD simulation of a real Unmanned Aerial Vehicle (UAV-Aircraft)

CFD simulation of a real Unmanned Aerial Vehicle (UAV-Aircraft) using ANSYS Fluent software Drones can be considered as small non-pilot…

Our Process

If you want to know what we will do with your project read our steps blow.

STEP 1

Please send the details of your project through the link below.

STEP 2

Our colleagues will call you as soon as possible; then after advising you on your project, we will specify the steps of the project in detail, the fee and the delivery time for each step.

STEP 3

After paying the deposit, we will start your project and the results of each step will be sent to you in the specified deadlines. Once you have investigated your results and confirmed it, the fee of that step should be paid.

STEP 4

All of the results and files related to simulations will be sent to you and you will receive the required training.

What are you waiting for? Submit your project consulting for free!

Free Consulting!

Yes, it is right that we can do everything you want the only thing that you should do is to fill the form at the Free Consulting Page and send us your project’s details then our support team will be in touch with you as soon as possible and they will give you free consulting for your project.

Free Consulting
Call On WhatsApp
Search