Multi-Phase Flow

Mr-CFD offers a complete range of CFD analysis, consulting services and training in Multi-Phase flow

Multiphase Flowvof
Multiphase flow has various application in the industrial procedure. Some of industrial application of multiphase flow is gas sweetening, jet loop reactor, polymer generation mixer, and dryer. It has also application in power generating like droplet combustion, coal combustion, boiling and evaporation, and fuel cells. Some of this application is related to petrochemical and petroleum engineering like multiphase flow inside the oil transfer tubes. Another application of multiphase flow is related to environment and medial application like rain and blood flow inside the vessel.

We are expert in CFD simulation of all multiphase flow models include eulerian-eulerian and eulerian lagrangian model. And also simulating mass transfer between phases than can occur with the following reason like boiling, melting. Solidification, Sublimation. Evaporation, condensation, and cavitation.

Species transport from one phase to another phase will occur due the concentration difference. Species fuel tanktransport usually will solve with mass transfer coefficient and concentration balance like Raoult and Henry.

ANSYS fluent has four modules for modeling of multiphase flow and each model has its advantage, disadvantage, and limitation. These modules are volume of fluid, mixture, eulerian and we steam. Wet steam is available only in compressible fluid flow and density-based model.

In the following you can see a summary of our performed word associated with the multiphase flow which is simulated by ANSYS Fluent software.

Free surface and open channel flow of various spillways
Improving jet loop reactor performance and increasing gas holdup using various method
Predicting entrainment ratio in two-phase ejector
Gas and liquid separator
Particle tracking and particle settlingvof
Gas-oil filling in an automobile fuel tank
Droplet releasing
Droplet pumps
Desalination of Salty water with solar energy
Float body in open channel flow like ships and boats
Multiphase simulation of heat transfer with freezing and melting operations
Water slushing in tank and damn (during vibration and earthquake)
Due to the wide range of mechanical science and the different fields of work as well as the abundance of projects, this company offers to view all the products presented in this section. In the absence of any desired project or project close to your request, you can search our portfolios in order to find your eligible project, after all, if you didn’t find any ideal project you can order your project from the services pages on the header of this website. Your order will be reviewed by our experts in the shortest possible time, and if we need more information about the proposed project, we will be in touch with you. After completing the required information to examine the proposed project, and confirming your request, the time, conditions and costs will be sent to you during the contract. This process will take place as soon as possible. If you have any question, you can contact to our online support section (the fixed blue tab below the page). If it is offline, don’t worry, you can post your message, and it will be answered as soon as possible.

Portfolios

These are our latest successful projects.

Cavitation Simulation In Francis Turbine By ANSYS Fluent
Cavitation Simulation in Francis Turbine by ANSYS Fluent
Free Surface Flows (Multiphase), Mechanical, Renewable, Turbomachinery

Cavitation Simulation in Francis Turbine by ANSYS Fluent

Cavitation simulation in Francis turbine by ANSYS Fluent One of the most prevalent applications of fluid mechanics is Turbomachinery designing.…

Combustion Chamber In The Gas Turbine Engine By ANSYS Fluent
Combustion chamber in the gas turbine engine by ANSYS Fluent
Combustion, Heat Transfer, Mechanical, Reacting Flows and Combustion, Single-Phase, Non-Reacting Flows

Combustion chamber in the gas turbine engine by ANSYS Fluent

CFD Simulation of the combustion chamber in the gas turbine engine by the ANSYS Fluent software Over the past twenty…

Air Conditioning CFD Simulation Of The Surgery Room
Air conditioning CFD simulation of the surgery room
Heat Transfer, Mechanical, Single-Phase, Non-Reacting Flows

Air conditioning CFD simulation of the surgery room

Air conditioning CFD simulation of the surgery room using the ANSYS Fluent software One of the most important hazards in…

3-blade Horizontal Axis Wind Turbine (HAWT)-CFD Simulation
3-blade horizontal axis wind turbine (HAWT)-CFD simulation
Aerospace, Mechanical, Single-Phase, Non-Reacting Flows

3-blade horizontal axis wind turbine (HAWT)-CFD simulation

3-blade horizontal axis wind turbine (HAWT) CFD simulation by ANSYS Fluent software Wind turbines generally convert wind energy into electrical…

Real Porous Media CFD Simulation By ANSYS Fluent Software
Real porous media CFD simulation by ANSYS Fluent software
Heat Transfer, Mechanical, Single-Phase, Non-Reacting Flows

Real porous media CFD simulation by ANSYS Fluent software

Real porous media CFD simulation by ANSYS Fluent software Study of fluid flow in porous media is one of the…

CFD Simulation Of A Real Unmanned Aerial Vehicle (UAV-Aircraft)
CFD simulation of a real Unmanned Aerial Vehicle (UAV-Aircraft)
Aerospace, Mechanical, Single-Phase, Non-Reacting Flows

CFD simulation of a real Unmanned Aerial Vehicle (UAV-Aircraft)

CFD simulation of a real Unmanned Aerial Vehicle (UAV-Aircraft) using ANSYS Fluent software Drones can be considered as small non-pilot…

Our Process

If you want to know what we will do with your project read our steps blow.

STEP 1

Please send the details of your project through the link below.

STEP 2

Our colleagues will call you as soon as possible; then after advising you on your project, we will specify the steps of the project in detail, the fee and the delivery time for each step.

STEP 3

After paying the deposit, we will start your project and the results of each step will be sent to you in the specified deadlines. Once you have investigated your results and confirmed it, the fee of that step should be paid.

STEP 4

All of the results and files related to simulations will be sent to you and you will receive the required training.

What are you waiting for? Submit your project consulting for free!

Free Consulting!

Yes, it is right that we can do everything you want the only thing that you should do is to fill the form at the Free Consulting Page and send us your project’s details then our support team will be in touch with you as soon as possible and they will give you free consulting for your project.

Free Consulting
Call On WhatsApp
Search