Sale

Aerodynamic & Aerospace ANSYS Fluent Training Package, 10 Practical Exercises for BEGINNER Users

$299.00

This product includes Geometry & Mesh file and a comprehensive Training Movie.

There are some free products to check the service quality.

To order your CFD Training Package (CFD simulation and training), contact our experts via [email protected], online support, or WhatsApp.

Intake of Jet Engine CFD Simulation by ANSYS Fluent Training

In this project, airflow in a three-dimensional jet intake is investigated.

This product includes Geometry & Mesh file and a comprehensive Training Movie.

There are some free products to check our service quality.

To order your ANSYS Fluent project (CFD simulation and training), contact our experts via [email protected], online support, or WhatsApp.

Spoiler Modes Comparison for F1 Car Aerodynamics, ANSYS Fluent Training

In this project, two different spoilers, in open and close modes are compared using CFD simulation in ANSYS Fluent software, to observe the difference between the lift and drag force between these two modes.

This product includes Geometry & Mesh file and a comprehensive Training Movie.

There are some free products to check our service quality.

To order your ANSYS Fluent project (CFD simulation and training), contact our experts via [email protected], online support, or WhatsApp.

Rotating Disk Effect on Surrounding Airflow CFD Simulation using Moving Wall, ANSYS Fluent Training

The present problem simulates a rotating disk in a room using ANSYS Fluent software.

This product includes Geometry & Mesh file and a comprehensive Training Movie.

There are some free products to check our service quality.

To order your ANSYS Fluent project (CFD simulation and training), contact our experts via [email protected], online support, or WhatsApp.

Slot Effect on Wing Aerodynamic Performance, ANSYS Fluent Simulation Training

In this project, steady air flow over an airfoil (NACA4421) with a slot on the leading edge is investigated.

This product includes Geometry & Mesh file and a comprehensive Training Movie.

There are some free products to check our service quality.

To order your ANSYS Fluent project (CFD simulation and training), contact our experts via [email protected], online support, or WhatsApp.

Cooling of Airfoil Surface by Lateral Hole Air Inlets, ANSYS Fluent Training

In this project, the movement of heated airflow over the surface of an airfoil and the surface cooling of the mentioned airfoil by the means of lateral air inlets is simulated.

This product includes Geometry & Mesh file and a comprehensive Training Movie.

There are some free products to check our service quality.

To order your ANSYS Fluent project (CFD simulation and training), contact our experts via [email protected], online support, or WhatsApp.

NACA 0012 Airfoil (Compressible Flow) CFD Simulation, ANSYS Fluent Training

This project is going to simulate a NACA 0012 airfoil in the compressible airflow field.

This product includes Geometry & Mesh file and a comprehensive Training Movie.

There are some free products to check the service quality.

To order your ANSYS Fluent project (CFD simulation and training), contact our experts via [email protected], online support, or WhatsApp.

Shock Wave in a Supersonic Airflow (Transient), ANSYS Fluent CFD Training

The problem is going to simulate the supersonic airflow encountered by a two-way oblique airfoil barrier passing through a channel, thus investigating fluid behavior and creating a shock wave phenomenon.

This product includes Geometry & Mesh file and a comprehensive Training Movie.

There are some free products to check the service quality.

To order your ANSYS Fluent project (CFD simulation and training), contact our experts via [email protected], online support, or WhatsApp.

3-D Airfoil, ANSYS Fluent CFD Simulation Training

This project is going to study an incompressible isothermal air flow adjacent to a 3-D airfoil.

This product includes Geometry & Mesh file and a comprehensive Training Movie.

There are some free products to check our service quality.

To order your ANSYS Fluent project (CFD simulation and training), contact our experts via [email protected], online support, or WhatsApp.

Aerospike CFD Simulation Considering Shock Wave, Ansys Fluent Training

In this project, an aerospike with shock wave generation has been simulated and the results of this simulation have been investigated.

This product includes Geometry & Mesh file and a comprehensive Training Movie.
There are some free products to check our service quality.
To order your ANSYS Fluent project (CFD simulation and training), contact our experts via [email protected], online support, or WhatsApp.

Airflow on the Dimpled Rotating Cylinder CFD Simulation, ANSYS Fluent Training

The project aim is to investigate the pressure distribution, rotational phenomena, and flow behavior around a rotating dimpled cylindrical wall.

This product includes Geometry & Mesh file and a comprehensive Training Movie.

There are some free products to check the service quality.

To order your ANSYS Fluent project (CFD simulation and training), contact our experts via [email protected], online support, or WhatsApp.

 

Special Offers

If you need expert guidance through the training, this gives you 1 hour of dedicated support

If you want to be certified for passing this training, you can choose this option.

Product price
Additional options total:
Order total:

Description

Aerodynamic & Aerospace ANSYS Fluent CFD Simulation Training Package for BEGINNERS

This training package includes 10 practical aerodynamic and aerospace engineering exercises, using ANSYS Fluent software. MR CFD suggests this package for all aerodynamic and aerospace engineers who will learn CFD simulation in this field at the BEGINNER level.

ANSYS Fluent software simulates the airflow in a three-dimensional jet intake as the practical exercise number 1. Jet engines are a primary and most commonly used thruster in aerodynamics. Every Jet engine includes the intake section similar to the present exercise, which is used for subsonic and supersonic flows.

Project number 2 is going to study an incompressible isothermal air flow adjacent to a 3-D airfoil. The geometry is a 1-meter airfoil inside a 20-meter wind tunnel. Also, the maximum speed of 10 m/s is selected for the inlet.

In practical exercise number 3, an aerospike has been simulated. The flow inlet has a pressure of 2000000 Pa and a temperature of 900 K. Also, the boundary condition of the pressure outlet is 50000 Pa, and simulation is performed as axisymmetric.

In project number 4, ANSYS Fluent software investigates steady airflow over an airfoil (NACA4421). Airfoil has a shape deformity called the slot, which separates it into two parts. A slot in the airfoil industry is used to optimize airfoil performance, including increased lift force.

Also, practical exercise number 5 simulates a rotating disk in a room using ANSYS Fluent software. This work aims to investigate the airflow behavior under the influence of the rotational motion of a rotating disk. In this simulation, there is airflow in a computational domain of a room, and in the middle of this room, a rotating disk with a certain rotational speed is placed.

In training number 6, the movement of heated airflow over the surface of an airfoil and the surface cooling of the mentioned airfoil using lateral hole air inlets is simulated. The heated air enters the computational. Two lateral air inlets are responsible for the airfoil cooling of the blade or airfoil.

Then, as the practical exercise number 7, we compare two different spoilers in opening and closing modes. The car as a moving device has always been involved with airflow, so the science of aerodynamics has helped engineers bring the best performance to the vehicle.

Problem number 8 is going to simulate airflow in a rectangular channel passing through a rotating dimpled cylinder. A cylindrical object is placed in the channel. The airflow enters the rectangular channel at a horizontal velocity of 0.45 m / s, and it collides with the cylindrical body.

Project number 9 is going to simulate a NACA0012 airfoil in the compressible airflow. Geometric defining parameters include chord line, angle of attack, leading-edge, and trailing edge. The direction of the airflow into the airfoil body is defined by the angle of attack (the angle between the chord and the horizontal direction of the airflow velocity).

Finally, project number 10 simulates the supersonic airflow encountered by a two-way oblique airfoil barrier passing through a channel, thus investigating fluid behavior and creating a shock wave phenomenon. The airflow in the simulation environment around the obstacles and canals has a temperature of 129.46 Kelvin and a Mach number of 2.49, and the direction of the airflow is generally assumed to be in the same direction. Since the airflow in this model is supersonic, it has a larger Mach number than 1.

You can obtain Geometry & Mesh file and a comprehensive Training Movie that presents how to solve the problem and extract all desired results.

Reviews

There are no reviews yet.

Leave a customer review

Your email address will not be published.

Back To Top
Search

Refund Reason

Whatsapp Call On WhatsApp