Sale

Separation Systems Training Package,10 Learning Products

$453.00 Student Discount

  • Gas Liquid Separator
  • Vortex Separator
  • Mud and Sand Separator
  • Three-Phase Flow Separator
  • Hydrocyclone
  • Fly Ash Cyclone
  • FCC Riser Gas-Solid Separation System
  • Reverse Osmosis
  • Filter Cake Formation
Click on Add To Cart and obtain the Geometry file, Mesh file, and a Comprehensive ANSYS Fluent Training Video.

To Order Your Project or benefit from a CFD consultation, contact our experts via email ([email protected]), online support tab, or WhatsApp at +44 7443 197273.

There are some Free Products to check our service quality.
If you want the training video in another language instead of English, ask it via [email protected] after you buy the product.

Reverse Osmosis (RO), CFD Simulation Ansys Fluent Training

  • This simulation is about reverse osmosis CFD Simulation via ANSYS Fluent software.
  • The geometry of the project is modeled in Design Modeler software.
  • The model meshed with ANSYS Meshing software. The model's grid is structured, and 44800 cells have been created.
  • The Eulerian model is used to simulate fluid multiphase behavior in a transient study with porous medium.

FCC Riser Gas-Solid Separation System Simulation

The present problem simulates gas-solid flow within a fluid catalytic cracking (FCC) system using ANSYS Fluent software.

Hydrocyclone with a Tangent-Circle Inlet CFD Simulation, Paper Numerical Validation

  • The problem numerically simulates the Hydrocyclone with a Tangent-Circle Inlet using ANSYS Fluent software.
  • We design the 3-D model with the Design Modeler software.
  • We mesh the model with ANSYS Meshing software, and the element number equals 228517.
  • This simulation is validated with a reference article.
  • We perform this simulation as unsteady (Transient).
  • We use the VOF Multiphase model to define water and air.

Cyclone by DPM ANSYS Fluent CFD Simulation Training

  • This product is a gas cyclone device CFD simulation by ANSYS Fluent software.
  • Due to the centrifugal force and heavier weight, particles separate from the gas stream and move downward due to gravitational force.
  • Design Modeler software models the current 3-D geometry.
  • ANSYS Meshing software grid the present model. The element number is 142499.
  • the solid particles enter the cyclone interior from the top as the discrete phase, applying the Discrete Phase Model (DPM).
  • We also define the discrete phase injection as the INERT of the cyclone inlet.

Multiphase Flow in Porous Medium, Filter Cake Formation, ANSYS Fluent CFD Simulation Training

  • The problem numerically simulates the Multiphase Flow in Porous Medium using ANSYS Fluent software.
  • We design the 3-D model with the Design Modeler software.
  • We mesh the model with ANSYS Meshing software.
  • the mesh type is Structured, and the element number equals 572852.
  • We perform this simulation as unsteady (Transient).
  • We use the Eulerian Multiphase model to define a two-phases flow.
  • We use the Porous medium in cell zone condition.

 

Fly Ash Cyclone CFD Simulation, Ansys Fluent Training

In this project, Fly Ash Cyclone has been simulated and the results of this simulation have been investigated.

Gas Liquid Separator CFD Simulation, ANSYS Fluent Tutorial

  • The problem numerically simulates a Gas-Liquid Separator using ANSYS Fluent software.
  • We design the 3-D model by the Design Modeler software.
  • We Mesh the model by ANSYS Meshing software, and the element number equals 356230.
  • We use the VOF Multi-phase model to define Hydrogen-sulfide and Oil in the chamber.

Vortex Separator, Hydrodynamic Eulerian CFD Simulation, ANSYS Fluent Training

The present problem simulates two-phase flow inside a hydrodynamic vortex separator using ANSYS Fluent software.

Well Drilling, Mud and Sand Separator, ANSYS Fluent CFD Simulation Training

The present problem simulates well drilling and sludge separation using ANSYS Fluent software.

Separator CFD Simulation, Three-Phase Flow, ANSYS Fluent Training

In this project, a 3-Phase Horizontal Separator with an Oil Bucket is simulated.

Special Offers For All Products

If you need the Geometry designing and Mesh generation training video for all the products, you can choose this option.
The journal file in ANSYS Fluent is used to record and automate simulations for repeatability and batch processing.
Editable geometry and mesh allows users to create and modify geometry and mesh to define the computational domain for simulations.
The case and data files in ANSYS Fluent store the simulation setup and results, respectively, for analysis and post-processing.
Geometry, Mesh, and CFD Simulation methodologygy explanation, result analysis and conclusion

Special Offers For Single Product

If you need the Geometry designing and Mesh generation training video for one product, you can choose this option.
If you need expert consultation through the training video, this option gives you 1-hour technical support.
The journal file in ANSYS Fluent is used to record and automate simulations for repeatability and batch processing.
editable geometry and mesh allows users to create and modify geometry and mesh to define the computational domain for simulations.
The case and data files in ANSYS Fluent store the simulation setup and results, respectively, for analysis and post-processing.
Geometry, Mesh, and CFD Simulation methodologygy explanation, result analysis and conclusion
The MR CFD certification can be a valuable addition to a student resume, and passing the interactive test can demonstrate a strong understanding of CFD simulation principles and techniques related to this product.
Enhancing Your Project: Comprehensive Consultation and Optimization Services
Collaborative Development of a Conference Paper on Cutting-Edge Topics with MR CFD
Collaborative Publication Opportunity: Contribute to an ISI Article and Get Featured in Scopus and JCR-Indexed Journals

Description

Separation Systems Training Package, CFD Simulation by ANSYS Fluent, 10 CFD Projects

The ANSYS Fluent CFD Simulation Separation Systems Training Package is intended to offer a thorough overview of the principles of CFD simulation with ANSYS Fluent. The package comprises ten CFD studies that span from fundamental fluid flow to complicated multiphase flows. Step-by-step instructions, full descriptions of the physics and numerical methods used, and a complete set of files for conducting the simulation are included in each project. The package also contains a full collection of lessons and reference materials to assist users in rapidly getting up to speed.

Ten different Separator devices are included in this training package Reverse Osmosis (RO), FCC Riser Gas-Solid Separation System, Hydrocyclone with a Tangent-Circle Inlet, and Cyclone. Also, we analyze Filter Cake Formation, Fly Ash Cyclone, Two-Phase Gas Liquid Separator, Vortex Separator, Well Drilling (Mud and Sand Separator), and Three-Phase Flow Separator.

 

Reviews

There are no reviews yet.

Leave a customer review

Your email address will not be published. Required fields are marked *

Back To Top
Search
Whatsapp Call On WhatsApp