Sale

Volume of Fluid (VOF), Package for Intermediate, Part 2, 10 Learning Products

Original price was: $1,120.00.Current price is: $370.00. Student Discount

This CFD training package is prepared for intermediate users of Ansys Fluent software in the Volume of Fluid (VOF) Multiphase area.

Click on Add To Cart and obtain the Geometry file, Mesh file, and a Comprehensive ANSYS Fluent Training Video.

To Order Your Project or benefit from a CFD consultation, contact our experts via email ([email protected]), online support tab, or WhatsApp at +44 7443 197273.

There are some Free Products to check our service quality.
If you want the training video in another language instead of English, ask it via [email protected] after you buy the product.

Spillway (3-D & Transient), ANSYS Fluent CFD Simulation Tutorial

  • The present problem simulates the flow of water through a spillway by ANSYS Fluent software.
  • The 3-D geometry of the present model is designed using Design Modeler software.
  • The meshing of the model has been done using ANSYS Meshing software and the element number is 698691.
  • The Transient solver is applied.
  • To define the two-phase flow in this simulation, a Multiphase VOF (volume of fluid) model is used, considering the Free Surface model.

 

Pond Overflow CFD Simulation by ANSYS Fluent Training

  • The problem numerically simulates the Pond Overflow using ANSYS Fluent software.
  • We design the 3-D model in two modes with the Design Modeler software.
  • We mesh the model with ANSYS Meshing software, and the element number equals 20142 and 16409.
  • We use the VOF Multiphase model to define water and air.

 

Lifting Dam CFD Simulation, Ansys Fluent Training

In this project, two different cases of lifting dams have been simulated and the results have been investigated.

Hydraulic Jump of Water in Rectangular Channel, ANSYS Fluent Training

In this project, hydraulic jump of water flow in a rectangular channel is analyzed.

Gas Liquid Separator CFD Simulation, ANSYS Fluent Tutorial

  • The problem numerically simulates a Gas-Liquid Separator using ANSYS Fluent software.
  • We design the 3-D model by the Design Modeler software.
  • We Mesh the model by ANSYS Meshing software, and the element number equals 356230.
  • We use the VOF Multi-phase model to define Hydrogen-sulfide and Oil in the chamber.

Separator Two-Phase Flow, CFD Simulation ANSYS Fluent Training

The present problem simulates the collision of air and water flow within a separator chamber using ANSYS Fluent software.

Mixer Tank CFD Simulation, ANSYS Fluent Training

  • The problem numerically simulates the Mixer Tank using ANSYS Fluent software.
  • We design the 3-D model by the Design Modeler software.
  • We Mesh the model by ANSYS Meshing software, and the element number equals 152641.
  • We use VOF multi-phase model to define 3 phases: air, water and salt.
  • We use the Frame Motion method to define rotational motion for the impeller.

 

Distillation Column Tray CFD Simulation, Two Phase

The present problem simulates the two-phase flow of air and water in a distillation column tray.

Ejector Two-Phase Flow CFD Simulation, ANSYS Fluent

In this project, a two-phase flow of vapor and liquid ammonia in a two-phase ejector has been simulated by ANSYS Fluent software.

Water Jet Considering Cavitation, ANSYS Fluent CFD Simulation Training

The present problem simulates the cavitation in a water jet by ANSYS Fluent software.

Special Offers For All Products

If you need the Geometry designing and Mesh generation training video for all the products, you can choose this option.
The journal file in ANSYS Fluent is used to record and automate simulations for repeatability and batch processing.
Editable geometry and mesh allows users to create and modify geometry and mesh to define the computational domain for simulations.
The case and data files in ANSYS Fluent store the simulation setup and results, respectively, for analysis and post-processing.
Geometry, Mesh, and CFD Simulation methodologygy explanation, result analysis and conclusion
If you want training in any language other than English, we can provide you with a subtitled video in your language.

Special Offers For Single Product

If you need the Geometry designing and Mesh generation training video for one product, you can choose this option.
If you need expert consultation through the training video, this option gives you 1-hour technical support.
The journal file in ANSYS Fluent is used to record and automate simulations for repeatability and batch processing.
editable geometry and mesh allows users to create and modify geometry and mesh to define the computational domain for simulations.
The case and data files in ANSYS Fluent store the simulation setup and results, respectively, for analysis and post-processing.
Geometry, Mesh, and CFD Simulation methodologygy explanation, result analysis and conclusion
The MR CFD certification can be a valuable addition to a student resume, and passing the interactive test can demonstrate a strong understanding of CFD simulation principles and techniques related to this product.
Enhancing Your Project: Comprehensive Consultation and Optimization Services
Collaborative Development of a Conference Paper on Cutting-Edge Topics with MR CFD
Collaborative Publication Opportunity: Contribute to an ISI Article and Get Featured in Scopus and JCR-Indexed Journals
If you want training in any language other than English, we can provide you with a subtitled video in your language.

Description

Multi-phase Volume Of Fluid (VOF) – ANSYS Fluent Training Package, 10 Practical Exercises for INTERMEDIATE Users

This CFD training package is prepared for intermediate users of Ansys Fluent software in the Volume of Fluid (VOF) Multiphase area. You will learn and obtain comprehensive training on how to simulate medium projects. The achieved knowledge will enable you to choose the most appropriate modeling approaches and methods for applications and CFD simulations.

This package trains the necessary proficiency you will require to start doing average computational fluid dynamics (CFD) Multi-phase VOF simulations on your own using Ansys Fluent software. Qualified training movies and comprehensive CFD concepts explanations, including setup, solution, results, and all perspectives of carrying out CFD simulations in Ansys Fluent.

Civil Structures

Spillways are structures used to pass through excess water and floods from the top to the bottom of the dam. In fact, spillways are structures with a certain height that discharge excess water when the water’s height exceeds its height. Project number 1 simulates the flow of water through a spillway. Since the modeled fluids are water and air, the two-phase flow model is used. To define the two-phase flow in this simulation, a two-phase VOF (volume of fluid) model is used.

Project number 2 simulates the water flow on an overflow that enters the pond. There is an ogee overflow in the current simulation that leads to a pond. In this simulation, two types of models are defined, in one of which, water flows as a free surface flow to the overflow and then flows into the pond; While in another, the water flows under pressure on the overflow and flows into the pond. Therefore, for both cases, a two-phase VOF flow model is used; So that the primary phase (air) and the second phase (water) are defined.

In project number 3, a Numerical simulation of the lifting dam has been performed. The VOF model is used to simulate two fluid phases, and the purpose of this project is to investigate the changes in the free surface of the fluid over time. Two models are reviewed in this project. In the first model, the flow continues its path after crossing the dam, but in the second model, it encounters an obstacle.

In project number 4, the hydraulic jump of water flow is analyzed. The VOF approach is utilized to simulate the water flow inside ambient air efficiently. Hydraulic jump is of great importance in agricultural applications and open channel flows where water flow, after a certain distance which can be solved using the analytical equation, undergoes a significant decrease in velocity and increase in flow height. The present work analyzes water flow with two different mass flow inlets, 50 and 80 kg/s.

Separator (volume of fluid)

In project number 5, separating the liquid phase from the gas using a horizontal cylindrical separator is investigated. A multi-phase VOF model is activated to simulate two phases of oil and hydrogen sulfide inside the separator. The mixture of oil and gas (with mass flow rates of 3kg/s and 0.15kg/s, respectively) enters the separator and since the oil is heavier than the gas, it settles down while the gas phase exits from the top outlet

Project number 6 simulates the collision of air and water flow within a separator chamber. In this model, a cylindrical separator chamber is designed whose interior space is full of water. Since this modeling has two phases, the multi-phase model should be used. For this reason, the VOF multiphase model is used in this modeling also, the effect of surface tension between the two phases is defined and the amount of surface tension between the two phases of the water and air is defined as 0.072 N.m-1.

Mixer

In project number 7, a mixer tank is modeled, and the effect of its rotating impeller on the mixing procedure is investigated. The simulation uses the VOF model for the three phases of air, water, and salt. The k-epsilon model is applied for solving the turbulent flow inside the tank. MRF model is also used to model the rotation of the impeller.

Distillation

Project number 8 simulates the two-phase flow of air and water in a distillation column tray. In tray towers, the process of separating the material takes place. His work does not simulate heat transfer and the process of evaporation and distillation. Since the present model consists of two phases of air and water, the multi-phase VOF model has been used.

Ejector (volume of fluid)

In project number 9, the two-phase flow of vapor and liquid ammonia in a two-phase ejector has been simulated. The VOF multi-phase model for two phases of liquid ammonia and vapor ammonia has been used to investigate the phase interactions. The liquid ammonia will enter the computational domain through the primary inlet with a pressure of 9MPa and a temperature of 393K. This flow will induce the vapor ammonia to exit the ejector and liquid ammonia.

Cavitation

Project number 10 simulates the water flow in a water jet. Since there is a possibility of pressure drop in this model, the cavitation phenomenon has been investigated because this phenomenon occurs when the fluid pressure drops to its vapor pressure. Therefore, the model of two-phase VOF flow and mass transfer between two phases of water and water vapor is defined as cavitation at a vapor pressure equal to 3540 Pascal. The present work aims to investigate the changes in the volume fraction of water and water vapor phases.

Reviews

  1. Avatar Of Dr. Rita Metz

    Dr. Rita Metz

    The VOF Training Package is truly comprehensive and enlightening. The step by step tutorials, paired with qualified training movies, have provided a clear understanding of both the setup and outcomes of each simulation. The methodology is meticulous and offers deep insights into complex multi-phase simulations. Particularly impressive is the range of applications, from civil structures to separators and mixers, each increasingly beneficial with your expert guidance. Kudos to MR CFD for delivering knowledge in such an accessible and practical way; I look forward to utilizing these skills in my own CFD projects.

    • Avatar Of Mr Cfd Support

      MR CFD Support

      Thank you for your positive feedback on our Volume of Fluid (VOF) Intermediate Training Package. We are thrilled to hear that you’ve found it comprehensive and enlightening. It is great to know that our tutorials and training materials have aided in your understanding of multi-phase simulations in Ansys Fluent. Your excitement about applying these skills to your projects motivates us to continue providing high-quality learning resources. If you have any questions or need further assistance as you embark on your CFD journey, do not hesitate to reach out. We wish you success in all your future CFD endeavors!

  2. Avatar Of Dulce Schamberger

    Dulce Schamberger

    I’ve completed the intermediate VOF training package and feel confident to start my own simulations! The hands-on exercises were incredibly valuable.

    • Avatar Of Mr Cfd Support

      MR CFD Support

      Thank you for your positive feedback! We’re delighted to hear that our intermediate VOF training package has effectively prepared you for your own CFD simulations. Best of luck with your projects, and should you have any questions in the future, feel free to reach out to us.

  3. Avatar Of Jammie O'Connell

    Jammie O’Connell

    I’ve just completed the ‘Volume of Fluid (VOF), Package for Intermediate, Part 2’ from MR CFD, and it was a fantastic learning experience. The ten distinct projects allowed me to delve deeply into multi-phase simulations using VOF and gave me the confidence to tackle real-world CFD challenges. The balance between theoretical knowledge and practical skills is commendable, providing a strong foundation for anyone looking to excel in the flow analysis of civil structures like spillways, separators, and even complex mixer tanks. Thanks, MR CFD, for such a thorough and enjoyable educational journey!

    • Avatar Of Mr Cfd Support

      MR CFD Support

      We’re thrilled to hear you found the Volume of Fluid (VOF) package so enriching and balanced! It’s always rewarding to learn that our customers can confidently apply the skills and knowledge acquired from our products to solve complex CFD problems. Thank you for choosing MR CFD and for taking the time to share your positive experience. Your feedback is greatly appreciated! If you have any additional inquiries or need further assistance with your simulations, feel free to reach out to us.

  4. Avatar Of Prof. Broderick Batz Phd

    Prof. Broderick Batz PhD

    I am curious, in Project number 4, how is the hydraulic jump analyzed in scenarios with two different mass flow inlets effectively?

    • Avatar Of Mr Cfd Support

      MR CFD Support

      In Project number 4, the hydraulic jump is analyzed by simulating both scenarios with respective mass flow inlets of 50 kg/s and 80 kg/s using the VOF approach. The simulations would capture how the water interacts with the ambient air, determining the location and characteristics of the hydraulic jump for each flow rate, therefore enabling us to evaluate the effects of varying inflows on the hydraulic jump phenomenon.

  5. Avatar Of Clemmie Ortiz

    Clemmie Ortiz

    I have gone through the VOF Training Package for Intermediate users, and I find the simulations quite comprehensive and detailed. In simulation number 6 involving the water and air collision in the separator chamber, I wonder how effectively it models real-world scenarios?

    • Avatar Of Mr Cfd Support

      MR CFD Support

      The simulation involving water and air collision in separator chamber models real-world scenarios quite effectively by utilizing the VOF multiphase model and taking into account realistic factors such as surface tension between the phases. The conditions are set up to mimic the interaction dynamics and behavior that would occur in similar physical setups, providing valuable insights into the physical phenomena at play.

  6. Avatar Of Prof. Carlos Schinner Jr.

    Prof. Carlos Schinner Jr.

    I’ve been going through Project 6 regarding the air and water flow collision in a separator chamber and I’m eager to know if in your simulation you’ve implemented any gravity effects or is the separation only due to difference in density and surface tension?

    • Avatar Of Mr Cfd Support

      MR CFD Support

      In our simulation for Project 6, gravity effects are indeed taken into account to more accurately model the separation process within the cylindrical separator chamber. While the density difference and surface tension play significant roles, gravity is included to ensure that the buoyancy effects lead to natural segregation of the water and air, akin to a real-world scenario.

Leave a customer review

Your email address will not be published. Required fields are marked *

Back To Top
Search
Whatsapp Call On WhatsApp