Sale

Renewable Energy Training Package, Intermediates, 10 Practical Exercises

$527.00 Student Discount

This training package, including 10 different practical exercises for INTERMEDIATE users, insets Computational Fluid Dynamics (CFD) methods and materials for designing, simulating, and dissecting applied and Renewable Energy Engineering CFD projects, with practical experiments using ANSYS Fluent software.

Click on Add To Cart and obtain the Geometry file, Mesh file, and a Comprehensive ANSYS Fluent Training Video. By the way, You can pay in installments through Klarna, Afterpay (Clearpay), and Affirm.

If you decide to use PayPal to pay, you will get a 5% discount on your order.

To Order Your Project or benefit from a CFD consultation, contact our experts via email ([email protected]), online support tab, or WhatsApp at +44 7443 197273.

There are some Free Products to check our service quality.

If you want the training video in another language instead of English, ask it via [email protected] after you buy the product.

Solar Heat Exchanger, ANSYS Fluent CFD Simulation Tutorial

  • The problem numerically simulates the Solar Heat Exchanger using ANSYS Fluent software.
  • We design the 3-D model by the Design Modeler software.
  • We Mesh the model by ANSYS Meshing software, and the element number equals 304200.
  • We use Discrete Ordinates (DO) and Solar Ray Tracing to consider radiation heat transfer.

Darrieus Wind Turbine CFD Simulation by ANSYS Fluent

  • The problem numerically simulates Darrieus Wind Turbine using ANSYS Fluent software.
  • We design the 3-D model by the Design Modeler software.
  • We Mesh the model by ANSYS Meshing software, and the element number equals 2289621.
  • We perform this simulation as unsteady (Transient).
  • We use the Mesh Motion method to define a rotational zone.

Helical Wind Turbine, ANSYS Fluent CFD Simulation Training

  • The problem numerically simulates the Helical Wind Turbine using ANSYS Fluent software.
  • We design the 3-D model with the Design Modeler software.
  • We mesh the model with ANSYS Meshing software, and the element number equals 2129987.
  • We perform this simulation as unsteady (Transient).
  • We use the Mesh Motion model to define rotational motion.

 

Horizontal Axis Wind Turbine (HAWT) Aerodynamic, ANSYS Fluent Training

  • The problem numerically simulates horizontal axis wind turbine (HAWT) aerodynamics using ANSYS Fluent software.
  • We design the 3-D model by the Design Modeler software.
  • We Mesh the model by ANSYS Meshing software, and the element number equals 2463521.
  • We use the Frame Motion to define rotational movement around the turbine.

Wind Turbine Considering Turbine Base 3-D Simulation

  • The problem numerically simulates a horizontal axis wind turbine using ANSYS Fluent software.
  • We design the 3-D model with the Design Modeler software.
  • We Mesh the model by ANSYS Meshing software, and the element number equals 1981472.
  • We use the Frame Motion (MRF) to define a rotational movement.

Helical Blade Wind Turbine, 5 different RPMs

  • The problem numerically simulates Helical Blade Vertical Axis Wind Turbine using ANSYS Fluent software.
  • This project investigates TSR (tip speed ratio) using different rotational speeds for blade turbines.
  • We design the 3-D model by the Design Modeler software.
  • We Mesh the model by ANSYS Meshing software, and the polyhedral element number equals 507457.
  • We perform this simulation as unsteady (Transient).
  • We use the Mesh Motion method to define rotational motion in the distinct zone around blades.

 

Two-Blade Savonius Wind Turbine CFD Simulation (2-D)

  • The problem numerically simulates Savonius Vertical Axis Wind Turbine using ANSYS Fluent software.
  • We design the 2-D model by the Design Modeler software.
  • We Mesh the model by ANSYS Meshing software, and the element number equals 58468.
  • We perform this simulation as unsteady (Transient).
  • We use the Mesh Motion model to define rotational motion.

Serrated Airfoil and Plain Airfoil Comparison, Darrieus VAWT, ANSYS Fluent CFD Simulation Training

  • The problem numerically simulates Serrated Airfoil and Plain Airfoil Comparison using ANSYS Fluent software.
  • We design the 3-D model by the Design Modeler software.
  • We mesh the model with ANSYS Meshing software, and the element number equals 1186185.
  • We perform this simulation as unsteady (Transient).
  • We use the Mesh Motion option to define the rotating motion of turbine blades.

Two-Blade Savonius Wind Turbine CFD Simulation (3-D)

  • The problem numerically simulates the Savonius (Two-Blade) Wind Turbine using ANSYS Fluent software.
  • We design the 3-D model by the Design Modeler software.
  • We Mesh the model by ANSYS Meshing software, and the element number equals 143168.
  • We perform this simulation as unsteady (Transient).
  • We use the Mesh Motion model to define rotational motion.

Wind Farm with Series Arrangement, ANSYS Fluent CFD Simulation Training

  • The problem numerically simulates the Wind Farm with Series Arrangement using ANSYS Fluent software.
  • We design the 3-D model by the Design Modeler software.
  • We Mesh the model by ANSYS Meshing software, and the element number equals 4154166.
  • We use the Frame Motion model to define the rotational movement.

Special Offers For All Products

If you need the Geometry designing and Mesh generation training video for all the products, you can choose this option.
The journal file in ANSYS Fluent is used to record and automate simulations for repeatability and batch processing.
Editable geometry and mesh allows users to create and modify geometry and mesh to define the computational domain for simulations.
The case and data files in ANSYS Fluent store the simulation setup and results, respectively, for analysis and post-processing.
Geometry, Mesh, and CFD Simulation methodologygy explanation, result analysis and conclusion

Special Offers For Single Product

If you need the Geometry designing and Mesh generation training video for one product, you can choose this option.
If you need expert consultation through the training video, this option gives you 1-hour technical support.
The journal file in ANSYS Fluent is used to record and automate simulations for repeatability and batch processing.
editable geometry and mesh allows users to create and modify geometry and mesh to define the computational domain for simulations.
The case and data files in ANSYS Fluent store the simulation setup and results, respectively, for analysis and post-processing.
Geometry, Mesh, and CFD Simulation methodologygy explanation, result analysis and conclusion
The MR CFD certification can be a valuable addition to a student resume, and passing the interactive test can demonstrate a strong understanding of CFD simulation principles and techniques related to this product.
Enhancing Your Project: Comprehensive Consultation and Optimization Services

Description

Renewable Energy – ANSYS Fluent Training Package, 10 Practical Exercises for INTERMEDIATE Users

This training package, including 10 different practical exercises for INTERMEDIATE users, insets Computational Fluid Dynamics (CFD) methods and materials for designing, simulating, and dissecting applied and Renewable Energy Engineering CFD projects, with practical experiments using ANSYS Fluent software.

Solar Heat Exchanger

First, we start this training package with a practical exercise about Solar Heat Exchangers since this kind of heat exchanger uses solar energy as one of the primary renewable energy sources. This system consists of two parts: the water flow moves in the central part of the heat exchanger, and the airflow is in the gap installed in the front plate of the heat exchanger. The water flow enters the heat exchanger at a speed of 4 m.s-1 and a temperature of 30 ° C, leaving the heat exchanger at atmospheric pressure.

The other 9 practical exercises of this renewable energy engineering training package relate to various kinds of wind turbines that use wind energy as one of the primary renewable energy sources.

Turbine

Vertical Axis Wind Turbine (VAWT)

Helical

Vertical Axis Wind Turbine (VAWT) is becoming increasingly crucial in wind power generation thanks to its adaptability for domestic installations. Practical exercise number 2 will simulate an airflow field close to a vertical axis HELICAL wind turbine. This paper aims to investigate the behavior of airflow and pressure distribution and study drag force.  In practical exercise number 3, we are simulating a SMALL SCALE Helical wind turbine with dimensions of 10 x 20 cm with an average diameter of 7 cm. This simulation was performed at wind speeds of 2 m / s and speeds of 60, 40, 80, 100, and 120 rpm, and torque was reported as output. Small-scale wind turbines can be used in places such as subways and tunnels and spaces with a lot of wind production, but the dimensions of the environment are limited.

Darrieus

Project number 4 will simulate an airflow field close to a vertical axis DARRIEUS wind turbine. The geometry included a rotary zone for the turbine walls and a stationary zone for the rest of the domain. The inlet is considered to wind with 1 m/s, and the turbine zone rotates with 120 RPM. Problem number 5 compares the airflow passing over two H-type Darrieus wind turbines of plain and serrated airfoils. In this project, the airflow enters the computational domain with a velocity of 7m/s, and we apply the RNG k-epsilon model to solve the turbulent flow equations. Also, it should be noted that the Mesh Motion option was enabled to simulate the rotating motion of turbine blades, and the rotation velocity of the rotating domain was set to 2.8285 rad/s.

Savonius

In project number 6, a 2-D two-blade Savonius wind turbine was simulated using moving mesh, and then the results were investigated. Air enters the fluid computational domain from the inlet with 10m/s velocity while the turbine rotates with a constant angular velocity of 10rpm. Our final goal is to illustrate the pressure and velocity distribution and fluid motion animation behind the turbine. In practical exercise, number 7, a 3-D two-blade Savonius wind turbine was simulated using sliding mesh, and the results were investigated. Air enters the fluid domain from the inlet with 10m/s velocity while the turbine rotates with a constant angular velocity of 40rpm. An essential feature of these turbines is receiving wind from all directions.

Horizontal Axis Wind Turbine (HAWT)

Fortunately, it is known that HAWTs have higher efficiency compared to VAWTs. Project number 8 will simulate an airflow field close to a STANDARD horizontal axis wind turbine.  The inlet is considered to wind with 1 m/s, and the turbine zone rotates at 16 RPM. Practical exercise number 9 will study an incompressible isothermal airflow close to a standard horizontal axis wind turbine considering a TURBINE BASE. The geometry is a wind turbine with a 30-meter base inside a 300-meter wind tunnel. Also, we select the maximum speed of 1 m/s is for the wind and the turbine velocity of 30 RPM.

Wind Farm

Finally, problem number 10 simulates HAWT with the series arrangement in a WIND FARM. In this project, four wind turbines are designed in a row in a specific computational domain of ​​a large field called a wind farm (turbine farm). The Frame Motion method has been used to simulate the rotational motion of turbines in this project.

[/vc_column_text][/vc_column][/vc_row]

Reviews

  1. Avatar Of Juliet Simonis

    Juliet Simonis

    I’m interested in the methodology used for the hydroelectric power simulation. Can you elaborate?

    • Avatar Of Mr Cfd Support

      MR CFD Support

      Certainly! The hydroelectric power simulation in this package is based on real-world scenarios. It helps you understand how water flow and turbine design can affect power generation. We can also adapt the simulation to fit your unique needs.

  2. Avatar Of Mr. Lincoln Block

    Mr. Lincoln Block

    What principles are the geothermal energy simulations in this package based on?

    • Avatar Of Mr Cfd Support

      MR CFD Support

      The geothermal energy simulations in this package are based on thermodynamics and fluid dynamics principles. They provide a detailed understanding of how geothermal energy can be harnessed for power production. We can tailor these simulations to align with your specific needs.

  3. Avatar Of Miss Anika Stroman Md

    Miss Anika Stroman MD

    Could you clarify how this package assists in understanding the impact of fluid-structure interactions on the performance of renewable energy systems?

    • Avatar Of Mr Cfd Support

      MR CFD Support

      Absolutely, Shima. This package encompasses exercises that are specifically aimed at modeling fluid-structure interactions in renewable energy systems. These exercises facilitate a deeper comprehension of how the interplay between fluid dynamics and the structural components of the system influences overall performance.

  4. Avatar Of Eloisa Walter

    Eloisa Walter

    Can you provide more information about this package’s solar photovoltaic system model?

    • Avatar Of Mr Cfd Support

      MR CFD Support

      Absolutely! The solar photovoltaic system model in our package is designed to help you understand the conversion of sunlight into electricity. It’s based on advanced principles of photovoltaic science and can be customized according to your specific needs.

Leave a customer review

Your email address will not be published. Required fields are marked *

Back To Top
Search
Whatsapp Call On WhatsApp