Sale

Electronics Cooling Training Package, 10 CFD Simulation Projects by ANSYS Fluent

$393.00 Student Discount

  • Paper validation related to the electric device cooling
  • Server room cooling
  • Battery cooling and thermal management
  • Heat sink
  • Microchannel

Click on Add To Cart and obtain the Geometry file, Mesh file, and a Comprehensive ANSYS Fluent Training Video.

To Order Your Project or benefit from a CFD consultation, contact our experts via email ([email protected]), online support tab, or WhatsApp at +1 (903) 231-3943.

There are some Free Products to check our service quality.

Heat Transfer Over a Serrated Finned Tube, Paper Numerical Validation, ANSYS Fluent

  • The problem numerically simulates Heat Transfer Over a Serrated Finned Tube using ANSYS Fluent software.
  • We design the 3-D model with the Design Modeler software.
  • We Mesh the model with ANSYS Meshing software, and the element number equals 356240.
  • This project is simulated and validated with a reference article.

If you need the Geometry designing and Mesh generation training video for one product, you can choose this option.

If you need expert consultation through the training video, this option gives you 1-hour technical support.

Server Room Cooling with 6 Cabinet, ANSYS Fluent CFD Simulation Training

  • The problem numerically simulates Server Room Cooling with 6 Cabinets using ANSYS Fluent software.
  • We design the 3-D model by the Design Modeler software.
  • We Mesh the model by ANSYS Meshing software, and the element number equals 448000.
  • The Energy Equation is activated, and a Heat Source is applied to the room.

If you need the Geometry designing and Mesh generation training video for one product, you can choose this option.

If you need expert consultation through the training video, this option gives you 1-hour technical support.

Battery Cooling (Thermal Management) by PCM, ANSYS Fluent Training

  • The problem numerically simulates the battery cooling by applying phase change material in a storage tank using ANSYS Fluent software.
  • We design the 3-D model by the Design Modeler software.
  • The present simulation is performed in two steps: without and with phase change material on both sides of the battery.
  • We mesh the model with ANSYS Meshing software.
  • The mesh type is Structured, and the element number equals 93090 and 276660 for the first and the second cases, respectively.
  • We perform this simulation as unsteady (Transient).
  • We use the Solidification and Melting model to define phase change materials.

If you need the Geometry designing and Mesh generation training video for one product, you can choose this option.

If you need expert consultation through the training video, this option gives you 1-hour technical support.

Thermal Management of Battery (Using Nano Fluid), CFD Simulation Ansys Fluent Training

In this project, Thermal Management of Battery (using Nano Fluid) has been simulated and the results of this simulation have been investigated.

This product includes Geometry & Mesh file and a comprehensive Training Movie.
There are some free products to check our service quality.
To order your ANSYS Fluent project (CFD simulation and training), contact our experts via [email protected], online support, or WhatsApp.

If you need the Geometry designing and Mesh generation training video for one product, you can choose this option.

If you need expert consultation through the training video, this option gives you 1-hour technical support.

IGBT Heat Sink Cooling CFD Simulation, ANSYS Fluent Training

  • The problem numerically simulates the cooling of an IGBT heat sink using ANSYS Fluent software.
  • We design the 3-D model with the Gambit software.
  • We Mesh the model by Gambit software, and the element number equals 11872367.
  • The Energy Equation is activated to apply the cooling process.

If you need the Geometry designing and Mesh generation training video for one product, you can choose this option.

If you need expert consultation through the training video, this option gives you 1-hour technical support.

Heat Sink Cooling with a Porous Medium, ANSYS Fluent CFD Tutorial

  • The problem numerically simulates the performance of phase change materials (PCM) in a storage tank using ANSYS Fluent software.
  • We design the 3-D model by the Design Modeler software.
  • We Mesh the model by ANSYS Meshing software.
  • The mesh type is Structured, and the element number equals 7680.
  • We use the Porous Medium to study the porous effect on heat transfer.

If you need the Geometry designing and Mesh generation training video for one product, you can choose this option.

If you need expert consultation through the training video, this option gives you 1-hour technical support.

Heat Sink Cooling CFD Simulation, ANSYS Fluent Training

  • The problem numerically simulates the Heat Sink Cooling using ANSYS Fluent software.
  • We design the 3-D model with the Design Modeler software.
  • We mesh the model with ANSYS Meshing software, and the element number equals 168480.
  • The Energy Equation is activated to consider heat transfer.

If you need the Geometry designing and Mesh generation training video for one product, you can choose this option.

If you need expert consultation through the training video, this option gives you 1-hour technical support.

Pin and Plate Heat Sink Performance Comparison, ANSYS Fluent CFD Simulation Training

The present simulation is about Pin and Plate Heatsink Heat Transfer of EHD via ANSYS Fluent, and the results of this simulation have been analyzed.

This product includes Geometry & Mesh file and a comprehensive Training Movie.

There are some free products to check our service quality.

To order your ANSYS Fluent project (CFD simulation and training), contact our experts via [email protected], online support, or WhatsApp.

If you need the Geometry designing and Mesh generation training video for one product, you can choose this option.

If you need expert consultation through the training video, this option gives you 1-hour technical support.

Microchannel Heat Sink, Heat Transfer Enhancement, ANSYS Fluent Training

  • The problem numerically simulates the heat transfer of water flow inside a microchannel heat sink using ANSYS Fluent software.
  • We design the 3-D model with the Design Modeler software.
  • We mesh the model with ANSYS Meshing software.
  • The mesh type is Structured, and the element number equals 1500000.
  • The Energy Equation is activated to consider heat transfer.

If you need the Geometry designing and Mesh generation training video for one product, you can choose this option.

If you need expert consultation through the training video, this option gives you 1-hour technical support.

Microchannel Heat Source CFD Simulation, ANSYS Fluent Tutorial

  • The problem numerically simulates the Microchannel Heat Source using ANSYS Fluent software.
  • We design the 3-D model by the Design Modeler software.
  • We mesh the model with ANSYS Meshing software.
  • The mesh type is Structured, and the element number equals 1500000.
  • The Energy Equation is activated to consider heat transfer.

If you need the Geometry designing and Mesh generation training video for one product, you can choose this option.

If you need expert consultation through the training video, this option gives you 1-hour technical support.

If you need the Geometry designing and Mesh generation training video for all the products, you can choose this option.

If you need the Geometry designing and Mesh generation training video for one product, you can choose this option.

If you need expert consultation through the training video, this option gives you 1-hour technical support.

Description

This training package includes 10 different CFD simulation projects using ANSYS Fluent software related to Electronics Cooling. MR-CFD suggests this package to those interested in Electrical & Power engineering, especially eclectic device cooling. This package introduces you to various electric device designs and how to simulate cooling for them, considering numerically a wide range of related studies.

First, start with a paper validation related to cooling of a serrated finned tube by applying CFD simulation with ANSYS Fluent software. After verifying our Computational Fluid Dynamics methodology, we investigate the cooling condition of a server room with 6 cabinets. Next, we will simulate battery cooling and thermal management by applying nano-fluid and PCM. Then we continue with simulating various heat sinks (IGBT, Pin and Plate, Porous) cooling. Finally, we finish this training package with 2 last examples about microchannels.

By studying this fantastic and practical training package, you can claim you are an expert in modeling and analyzing every CFD simulation related to electronics cooling. Then you’ll be ready to enter the related industries as a CFD engineer.

Reviews

There are no reviews yet.

Leave a customer review

Your email address will not be published. Required fields are marked *

Back To Top
Search
Whatsapp Call On WhatsApp